- This topic has 1 reply, 2 voices, and was last updated 12 years ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
A website for owners of the world's greatest little car
By
2CV Club Australia › Forums › 2CV Technical › Driver seat problem
Got this 2cv from Switzerland, came in over Perth, got a problem with the driver seat, lefthand drive! It seams to hang in an angle horizontally AND linear to the outside and I never feel very comfty in it! Tried to bend it, foam wedges and longer screws, but it just seems wrong! Does anybody know about the problem? Were there different seats made for left and righthand side drives? I would appreciate any input!
Ame from Nimbin
@ameletter 448 wrote:
Got this 2cv from Switzerland, came in over Perth, got a problem with the driver seat, lefthand drive! It seams to hang in an angle horizontally AND linear to the outside and I never feel very comfty in it! Tried to bend it, foam wedges and longer screws, but it just seems wrong! Does anybody know about the problem? Were there different seats made for left and righthand side drives? I would appreciate any input!
Ame from Nimbin
i also had this problem
i cut the frame bent it round till straight then rewelded the frame
obviously you will have to take off the trim to do this and measure distance between holes in floor so you have something to work to
andy